When to Use a Saucer Pass in Hockey
A saucer pass is a low, lifted pass that clears an obstacle and comes back down where a teammate can play it. In hockey, use it when a stick blocks the ice-level lane and the receiver has room to collect the puck. When the lane is clear, a flat pass is usually easier to handle.
Picture a teammate skating across open ice. A defender reaches one stick into the lane. Look beyond the blade before you pass. If the puck has room to land ahead of your teammate’s stick, a little lift may help. If the defender is close enough to reach the landing spot, move your feet or move the puck to another option.

Read the Lane and the Landing Spot
Start with the receiver. Where will their blade be when the puck gets there? A stationary partner needs the puck within easy reach. A moving partner needs it far enough ahead to receive in stride. Either way, the landing spot matters as much as the obstacle.
A stick blade lying across the lane may only require a small lift. A defender’s skates and body take away much more space. If the path is crowded at both ends, look for a pass around the pressure. In USA Hockey’s guide to defending passing lanes, taking away the ice-level lane forces a harder pass for both players.
Start With a Low Forehand Pass
Start close to a partner. Open the blade slightly and sweep it toward the target, letting the puck move along the blade as it leaves. Experiment with a small change in blade angle and watch where the puck lands. Keep the motion compact enough to repeat without adding a big windup.
Aim for the puck to settle on the ice near the receiver’s blade. If it skips into their skates or makes them reach up, reduce the lift and start again at a shorter distance. On the receiving side, present a clear target and follow the puck until it is settled enough to make the next play. See how to receive a hard hockey pass for more work on absorbing and controlling a pass.
Practice the Decision With a Partner
Set a landing target. Put two flat markers on the ice to show the area where the puck should land. Make a few flat passes first so both players can find the right pace. Then work on a low lift to the same area.
Add one obstacle. Have a coach set a spare stick flat across the lane, clear of anyone’s skating path. Pass over it while both players are stationary. Count a rep when the puck clears the blade, lands in the target area and can be controlled on the next touch. Move the players closer if achieving all three requires too much height.
Mix open and blocked lanes. With a coach controlling the drill, alternate between an open lane and a stick in the lane. Have the passer choose a flat pass, low lift or a different angle. Once that decision becomes consistent, let the receiver glide through the target area and adjust the pass to their speed.
Check What the Receiver Can Do Next
If a pass clears the stick but leaves the receiver reaching behind their skates, it hasn’t achieved much. Watch whether the receiver can collect it in stride and keep their eyes on the play. That gives the pair feedback on height, pace and placement in a single rep.
Work on Puck Skills in Elmwood Park
Players in Elmwood Park and across North Jersey can bring this drill to a private hockey lesson for feedback on blade angle and landing distance. For group practice, check the weekly clinic schedule for the current skill focus.


